Interra ITR106 :
Description :
ITR106 device is used to interface the contacts to KNX bus substructure such as push buttons, switches etc. to make them communicating devices.
Configuration and features :
- The complete configuration of the device is performed via ETS3 or higher.
- Depending on ETS configuration and settings the product feature will be different.
- Avaialble functions are:
- Switching
- Dimming
- Toggle
- Blind Control
- 2 Channel
- Value Selected
- Most of functions only need one input and therefore each input might be assigned a different function. However there are also some functions which use two inputs such as “Dimming with 2 buttons” and “Shutter/Blinds with 2 buttons”.
Mounting, commissionning and safety notes :
- The device may only be installed and put into operation by a qualified electrician or authorized personnel.
- The device is inserted in a flush-mounted combined joint box.
- The installation location should not be in the outdoor area.
- The voltage potentials on the lines connecting the contacts are not electrically isolated from the bus voltage.
- Permitted cable length can be up to 5 meters and unused wires should be insulated.
- Avoid contact with liquids and corrosive gases.
- Do not get wrong connection for KNX Black and Red wires.
- Please do not forget to recheck all connections after installation