DS-2CD4035FWD(-AP)
Camera
Image Sensor
1/2.8’’ Progressive Scan CMOS
Min. Illumination
Color: 0.005 Lux @ (F1.2, AGC ON), B/W: 0.0005 Lux @ (F1.2, AGC ON)
Shutter Speed 1s ~ 1/100,000s
Slow Shutter Support
Lens Mount C/CS mount
Auto-iris DC drive (-P: support P-Iris)
Day & Night IR cut filter with auto switch
WDR 120dB
Focus -A: support ABF
Compression Standard
Video Compression H.264+/H.264/MJPEG
H.264 Type Baseline Profile / Main Profile / High Profile
Video Bit Rate 32 Kbps – 16 Mbps
Audio Compression G.711/G.722.1/G.726/MP2L2
Audio Bit Rate 64Kbps(G.711) / 16Kbps(G.722.1) / 16Kbps(G.726) / 32-128Kbps(MP2L2)
Image
Max. Resolution 2048 x 1536
Frame Rate
50Hz: 45fps(2048 × 1536), 50fps@(1920 × 1080, 1280 x 720)
60Hz: 45fps(2048 × 1536), 60fps@(1920 × 1080, 1280 x 720)
Third Stream
Independent with Main Stream and Sub Stream, up to
50/60Hz: 10fps@1280 ×720
Image Enhancement BLC/3D DNR/ROI/Defog
Image Setting
Rotate Mode, Saturation, Brightness, Contrast, Sharpness adjustable by client software
or web browser
Regional Cropping Support
Day/Night Switch Auto/Schedule/Triggered by Alarm In
Picture Overlay LOGO picture can be overlaid on video with 128×128 24bit bmp format
Network
Network Storage NAS (Support NFS,SMB/CIFS), ANR
Alarm Trigger
Motion detection, Tampering alarm, Network disconnect, IP address conflict, Storage
exception
Protocols
TCP/IP, UDP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP,
SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour
Security User Authentication, Watermark, IP address filtering, Anonymous access
Standard ONVIF(PROFILE S,PROFILE G),PSIA,CGI,ISAPI
Interface
Audio 1-ch 3.5 mm audio in( Mic in/Line in)/out interface, 1 build-in Microphone
Communication Interface 1 RJ45 10M/100M/1000M Ethernet port, 1 RS-485 interface and 1 RS-232 interface
Alarm 1 input, 1 output (up to DC24V 1A or AC110V 500mA )
Video Output 1Vp-p composite output (75 Ω/BNC)
On-board storage Built-in Micro SD/SDHC/SDXC slot, up to 128 GB
Reset Button Yes
Audio
Environment Noise Filtering Support
Audio I/O Support dual audio track, stereo
Audio Sampling Rate 16kHz / 32kHz / 44.1kHz / 48kHz
Smart Feature-set
Behavior Analysis
Line crossing detection, Intrusion detection, Region entrance, Region exiting, Unattended
baggage, Object removal
Line Crossing Detection Cross a pre-defined virtual line
Intrusion Detection Enter and loiter in a pre-defined virtual region
Region Entrance Enter a pre-defined virtual region from the outside place
Region Exiting Exit from a pre-defined virtual region
Unattended Baggage
Objects left over in the pre-defined region such as the baggage, purse, dangerous
materials
Object Removal Objects removed from the pre-defined region, such as the exhibits on display.
Exception Detections
Scene change detection, Sudden audio increase/decrease detection, Audio loss
detection, Defocus detection
Recognition Face detection recognition
Statistics
Object Counting (Entrance and Exit object number is accounted and showed on screen in real
time)
General
Operating Conditions -30 °C – 60 °C (-22 °F – 140 °F), Humidity 95% or less (non-condensing)
Power Supply 24 V AC ± 10%, 12 V DC ± 10%, PoE (802.3af)
Power Consumption Max. 6 W (Max. 9W with IR cut filter on)
Dimensions 69.8×58×145 mm (2.75” × 2.28” × 5.71”)
Weight 830 g (1.83 lbs)
