Application
Cable applied in structured local networks used for high speed data and voice transmission, at primary, secondary (vertical) and tertiary (horizontal) level.Standardized for application up to 250 MHz (in certain configurations even up to 400 MHz).Length of this cable in 1000BASE-T networks is restricted at max. 100 m (ordinarily installed cable max. 90 m, with connecting cables of up to 5 m at both ends).
Standard
ISO/IEC 11801
IEC 61156-5
EN 50173
EN 50288-6-1
TIA/EIA-568-B
Construction
Conductor:copper (bare, single wired/solid), diameter 0,56 mm, AWG23
Insulation:polyethylene (PE), external diameter 1 mm, per two conductors twisted in pairs
Pairs separator:polyethylene of cross-shaped cross-section
Sheath:external diameter 6,2 – 6,8 mm
possible designs:PVC or halogen-free (LSHF, LSOH, FRNC)
sheath colour:blue (RAL 5012)
Conductor colour marking:
1. pair:blue / white with blue line
2. pair:orange / white with orange line
3. pair:green / white with green line
4. pair:brown / white with brown line
Technical data
Temperature range:during installation:0°C up to +50 °C
operating temp.:-20 °C up to +60 °C
Min. inner bending radius:fixed installed:4D
under load:8D
Behaviour in fire:IEC 60332-1
Fire load:
PVC:358 MJ/km
LSHF:329 MJ/km
Maximal tensile strength:100 N
Cable weight:
PVC:39 kg/km
LSHF:40 kg/km
Copper weight:20,5 kg/km
