Detail Introduction
The BDCOM S5800 series switch is a new generation of high-performance data center all-Gigabit TOR switch launched by Shanghai BDCOM Co., Ltd. for high-performance cloud computing, data centers and high-end campus networks . The S5800 series adopts advanced hardware architecture design to provide the industry’s highest switching performance and rich data center service features.
S5800 Series support up 2.56Tbps switching capacity, 1U of the whole maximum support 48 a 10G port +2 a 40G port +4 a 100G ports, or 72 a 10G port.
In order to meet the needs of cloud computing data center network resource pooling, the S5800 series supports rich BVSS (Boda Virtual Switching System Technology) virtualization features and data center features such as TRILL , SDN , and FCoE/FC . Cooperating with BDCOM S9500 series data center core switches, it can realize the access of 15,000+ 10 Gigabit servers, providing a complete network solution for ultra-large data centers.
The S5800 series is equipped with the BDROS 6- generation operating system with BDCOM’s independent intellectual property rights . On the basis of providing high-performance L2/L3/L4 wire-speed switching services, it further integrates IPv6 , MPLS VPN , network security, traffic analysis, virtualization, etc. Network services, combined with multiple data center high-reliability technologies such as uninterrupted upgrades, uninterrupted forwarding, graceful restart, and redundancy protection, ensure the longest uninterrupted communication capability of the network.
Originated from BDCOM’s advanced » GreenTouch » concept and industry-leading » Smart@CHIP » smart chip green energy-saving technology, which greatly reduces energy consumption, is low-carbon and environmentally friendly, effectively reduces data center operating costs, and contributes to the green and sustainable development of the network Provides a perfect solution.
Main features
Rich data center business features
■ BVSS ( BDCOM Virtual Switch System ) virtual cluster switching technology
■ S5800 supports BDCOM’s innovative BVSS virtual cluster switching technology, which can virtualize multiple physical devices into a logical device. The performance, reliability, flexibility and management of its virtual system are compared to independent physical devices. Has unparalleled superiority.
■ Doubled performance: the virtualization system can make full use of every link between physical devices, avoiding the traditional networking model spanning tree protocol to block the link, making the best use of everything, doubling the performance, and protecting the original link to the greatest extent investment.
■ High reliability: Based on advanced distributed processing technology, through the efficient cross-physical device link aggregation function, the logical control plane and the business data plane are separated, providing uninterrupted three-layer routing and forwarding, and avoiding single points of failure. The business interruption caused greatly improves the reliability of the virtual system.
■ Flexibility: Through the virtual cluster function of S5800 , the distance of the virtual cluster system can be extended to 80KM , which is flexible and convenient, breaking the geographical restriction of traditional cluster technology.
■ Easy management: The entire virtual system realizes unified management of a single IP , and the actual physical equipment is transparent to users, which simplifies the management of network equipment and network topology, greatly improves network operation efficiency, and effectively reduces operation and maintenance costs.
■ Unified exchange: Support FCoE ( FC over Ethernet ) technology to solve the heterogeneous problem of LAN network and FC storage network, so as to realize the integration of computing, data, and storage networks, and realize unified exchange.
Data center-level high reliability
■ Based on the HPS ( Hitless Protection System ) non-disruptive protection system, the key power system adopts redundant design, modular and hot-swappable, and supports seamless switching in case of failure without interrupting business.
■ S5800 supports STP/RSTP/MSTP protocol, VRRP protocol, and also supports ring network protection, dual uplink active/standby link protection, LACP link aggregation and other simple and efficient redundancy protection mechanisms.
■ Support ISSU ( In-ServiceSoftware Upgrade ) business uninterrupted system upgrade to ensure the uninterrupted forwarding of user data during system upgrade and master control switching.
■ The ultra-high-precision BFD two-way link detection mechanism realizes millisecond fault detection and business recovery through linkage with the second and third layer protocols, which greatly improves the reliability of the network system.
■ Complete Ethernet OAM mechanism, supporting 802.3ah , 802.1ag and ITU-Y.1731 , real-time monitoring of the network operation status, to achieve rapid detection and location of faults.
High reliability design ■ S5800 hardware and software to meet the 50ms fault recovery time requirements, truly the core equipment 5 Ge 9 ( 99.999% ) high reliability.
Rich business features
■ Complete Layer 2 and Layer 3 multicast routing protocols to meet the access requirements of IPTV , multi-terminal high-definition video surveillance and high-definition video conferences;
■ Complete three-layer routing protocols and large routing table capacity can meet the needs of various types of network interconnection, and can form large data center networks, campus networks, enterprise networks and industrial user private networks.
■ It fully supports Layer 2 and Layer 3 MPLS VPN , and can build a large-scale MPLS VPN core network to meet the access needs of industry private network VPN users and enterprise network VPN users.
Comprehensive IPv6 solution
■ full support for IPv6 protocol suite, support for IPv6 Neighbor Discovery, ICMPv6 , the PathMTU discovery, DHCPv6 and other IPv6 features.
■ Supports Ping , Traceroute , Telnet , SSH , ACL, etc. based on IPv6 to meet the needs of pure IPv6 network equipment management and business control.
■ Support MLD , MLDSnooping such as IPv6 multicast features, support for IPv6 static routing, RIPng , OSPFv3 , BGP4 + and other IPv6 Layer 3 routing protocols, to provide users with comprehensive IPv6 two, three solutions.
■ Support rich IPv4 to IPv6 transition technologies, including: IPv6 manual tunnel, automatic tunnel, 6to4 tunnel, ISATAP tunnel and other tunnel technologies to ensure the smooth transition from IPv4 network to IPv6 network.
Perfect safety mechanism
■ Device-level security protection: advanced hardware architecture design, hardware implements hierarchical scheduling and protection of packets, supports defense against DoS , TCP ‘s SYN Flood , UDP Flood , broadcast storm, heavy traffic and other attacks on the device; supports command line classification Protection, users of different levels have different management rights;
■ Complete security authentication mechanism: support IEEE 802.1x , Radius , BDTacacs+, etc., which can provide users with a complete security authentication mechanism.
■ Enhanced service security mechanism: support clear text or MD5 authentication of related routing protocols , support uRPF reverse routing search technology, which can effectively control illegal services; hardware-level packet in-depth detection and filtering technology, support for control messages and data messages In-depth detection, thereby effectively isolating illegal data packets, and improving the security of the network system.
Innovative green design
■ S5800 inherits Barda’s advanced » GreenTouch » concept, energy saving and environmental protection.
■ Intelligent power management system: S5800 adopts advanced power system architecture design to realize efficient power conversion, unique power monitoring, slow start and other functions, real-time monitoring of the whole machine running status, intelligent adjustment, and deep energy saving.
■ Intelligent fan management system: intelligent fan design, supports flexible selection of front and rear air ducts, supports automatic fan speed adjustment, effectively reduces speed, reduces noise, and extends the life of the fan.
■ It supports the energy-efficient Ethernet function and follows the international standard IEEE 802.3az , which effectively reduces energy consumption.
Technical Parameters
model | S5864H | |||
Exchange capacity | 2.56Tbps | |||
Packet forwarding rate | 1430Mpps | |||
Number of power slots | 2 | |||
Number of fan slots | 4 | |||
Service port description | 48 10G SFP+ optical ports, 2 40G QSFP+ optical ports, 4 100G QSFP28 optical ports | |||
Chassis size mm (width × depth × height) | 440 ×405×44 |
Data center characteristics | Support BVSS virtualization technology
Support FCOE |
|
MAC exchange function | Support static configuration and dynamic learning of MAC address
Support view and clear MAC address Configurable MAC address aging time Support MAC address learning limit Support MAC address filtering function Support black hole MAC entries |
|
VLAN | Support 4K VLAN table entries
Support GVRP Support 1:1 and N:1 VLAN Mapping Support basic QinQ and flexible QinQ functions Support Private VLAN |
|
STP | Support 802.1D (STP), 802.1W (RSTP), 802.1S (MSTP)
Support BPDU protection, root protection, loop protection |
|
Multicast | Support IGMP v1/v2/v3
Support IGMP Snooping Support IGMP Fast Leave Support multicast group policy and limit on the number of multicast groups Supports cross-VLAN replication of multicast traffic Support PIM-SM, PIM-DM |
|
IPv4 | Support static routing, RIP v1/v2, OSPF, BGP
Support policy routing Support equal cost routing to achieve load balancing Support BFD for OSPF, BGP |
|
IPv6 | Support ICMPv6, DHCPv6, ACLv6, IPv6 Telnet
Support IPv6 neighbor discovery Support Path MTU discovery Support MLD, MLD Snooping Support IPv6 static routing, RIPng, OSPFv3, BGP4+ Support manual tunnel, ISATAP tunnel, 6to4 tunnel |
|
MPLS VPN | Support LDP protocol
Support MCE P/PE function requirements to support MPLS VPN Support MPLS TE Support MPLS OAM |
|
QoS | Support traffic classification based on each field of the L2/L3/L4 protocol header
Support CAR flow limit Support 802.1P/DSCP priority re-marking Support queue scheduling methods such as SP, WRR, SP+WRR, etc. Support congestion avoidance mechanisms such as Tail-Drop and WRED Support traffic monitoring and traffic shaping |
|
Safety features | Support L2/L3/L4 based ACL flow identification and filtering security mechanism
Support anti-DDoS attack, TCP SYN Flood attack, UDP Flood attack, etc. Supports suppression of multicast, broadcast, and unknown unicast messages Support port isolation Support port security, IP+MAC+port binding Support DHCP Snooping, DHCP Option 82 Support IEEE 802.1x authentication Support Radius, BDTacacs+ certification Support uRPF Support command line hierarchical protection |
|
reliability | Support power 1+1 backup
Support power supply and fan hot swap Support static/LACP mode link aggregation, support cross-device link aggregation Support ring network protection such as EAPS Support VRRP Support Ethernet OAM 802.3ah/802.1ag/ITU-Y.1731 Support GR for OSPF, BGP Support BFD for OSPF, BGP Support ISSU business uninterrupted system upgrade |
|
Management and maintenance | Support Console, Telnet, SSH
Support SNMP v1/v2/v3 Support file upload and download management in TFTP mode Support RMON Support sFLOW, Netflow traffic statistics analysis |
|
green technology | Support IEEE 802.3az Green Energy Efficient Ethernet | |
Environmental requirements | Working temperature/humidity: -10℃-50℃, 10%-90% non-condensing
Storage temperature/humidity: -20℃-70℃; 5%-95% non-condensing |
|
power supply | AC : 100V-240V, 50Hz±10%
DC: -36V~-72V |
Ordering Information
project | description |
S5800 series host | |
S5864H | 48 port 10 Gigabit optical + 2 40G optical + 4 port 100G optical, Ethernet routing switch (one console port, 1 out-of-band management Gigabit electrical port + 48 ten thousand/gigabit SFP+ optical ports + 4*100G/40G Optical port (QSFP28 package, can be adapted to 40GE QSFP+ or configured into 4 10GE) + 2 40G QSFP+ optical ports (each 40G port can be expanded to 4 10G ports); two power supply slots, standard 2 AC220V Power supply, 4 fan slots, standard configuration includes 4 fans, fan cooling, support front/rear air duct design, 1U height, 19-inch rack installation) |
S864H-DC | 48 port 10 Gigabit optical + 2 40G optical + 4 port 100G optical, Ethernet routing switch (one console port, 1 out-of-band management Gigabit electrical port + 48 ten thousand/gigabit SFP+4*100GE (QSFP28 package, It can be adaptive to 40GE or configured into 4 10GE) + 2 40G QSFP+ optical ports (each 40G port can be expanded to 4 10G ports); two power supply slots, standard 2 DC-48V power supplies; 4 Fan slot, standard configuration includes 4 fans, fan heat dissipation, support front and rear/rear front air duct design, 1U height, 19-inch rack installation) |
Optical module | |
Gigabit optical module | |
GSFP-TX-B | Gigabit SFP optical to RJ45 electrical port module |
GSFP-SX-D | Gigabit SFP multi-mode (500m, 850nm, LC, DDM) |
GSFP-LX-10-D | Gigabit SFP single mode (10Km, 1310nm, LC, DDM) |
GSFP-LX-20-D | Gigabit SFP single mode (20Km, 1310nm, LC, DDM) |
GSFP-LX-40-D | Gigabit SFP single mode (40Km, 1310nm, LC, DDM) |
GSFP-ZX-80-D | Gigabit SFP single mode (80Km, 1550nm, LC, DDM) |
GSFP-LX-SM1310-10-BIDI
GSFP-LX-SM1550-10-BIDI |
Gigabit SFP single-mode, single-core bidirectional (10Km, TX1310/RX1550, LC, DDM)
Gigabit SFP single-mode, single-core bidirectional (10Km, TX1550/RX1310, LC, DDM) |
GSFP-LX-SM1310-20-BIDI
GSFP-LX-SM1550-20-BIDI |
Gigabit SFP single-mode, single-core bidirectional (20Km, TX1310/RX1550, LC, DDM)
Gigabit SFP single-mode, single-core bidirectional (20Km, TX1550/RX1310, LC, DDM) |
GSFP-LX-SM1310-40-BIDI
GSFP-LX-SM1550-40-BIDI-1310 |
Gigabit SFP single-mode, single-core bidirectional (40Km, TX1310/RX1550, LC, DDM)
Gigabit SFP single-mode, single-core bidirectional (40Km, TX1550/RX1310, LC, DDM) |
GSFP-LX-SM1490-80-BIDI
GSFP-LX-SM1550-80-BIDI |
Gigabit SFP single-mode, single-core bidirectional (80Km, TX1490/RX1550, LC, DDM)
Gigabit SFP single-mode, single-core bidirectional (80Km, TX1550/RX1490, LC, DDM) |
Gigabit optical module | |
SFP+SX | 10G SFP+ multimode (300m, 850nm, LC) |
SFP+LX-10 | 10G SFP+ single mode (10Km, 1310nm, LC, DDM) |
SFP+LX-20 | 10G SFP+ single mode (20Km, 1310nm, LC, DDM) |
SFP+LX-40 | 10G SFP+ single mode (40Km, 1550nm, LC, DDM) |
SFP+LX-80 | 10G SFP+ single mode (80Km, 1550nm, LC, DDM) |
SFP+LX-SM-1270-10 | 10G SFP+ single-mode, single-core bidirectional (10Km, TX1270/RX1330, LC, DDM) |
SFP+LX-SM-1330-10 | 10G SFP+ single-mode, single-core bidirectional (10Km, TX1330/RX1270, LC, DDM) |
SFP+LX-SM-1270-20 | 10G SFP+ single-mode, single-core bidirectional (20Km, TX1270/RX1330, LC, DDM) |
SFP+LX-SM-1330-20 | 10G SFP+ single-mode, single-core bidirectional (20Km, TX1330/RX1270, LC, DDM) |
SFP+LX-SM-1270-40 | 10G SFP+ single-mode, single-core bidirectional (40Km, TX1270/RX1330, LC, DDM) |
SFP+LX-SM-1330-40 | 10G SFP+ single-mode, single-core bidirectional (40Km, TX1330/RX1270, LC, DDM) |
40G optical module | |
QSFP+40G-SR4-100m | 40G QSFP+ optical module (100m, 850nm, MPO, DDM, support 1 point 4) |
QSFP+40G-LR4-10 | 40G QSFP+ optical module (10Km, 1310nm, LC, DDM) |
40G multimode cable | |
QSFP-MPO-1-1m | 40G optical module one-to-one connection cable, length 1m, both ends are MPO interfaces |
QSFP-MPO-1-3m | 40G optical module one-to-one connection cable, length 3m, both ends are MPO interfaces |
QSFP-MPO-1-5m | 40G optical module one-to-one connection cable, length 5m, both ends are MPO interfaces |
QSFP-MPO-LC-4-1m | 40G one-to-four connection cable, length 1m, one end with MPO interface, the other end with double LC interface |
QSFP-MPO-LC-4-3m | 40G one-to-four connection cable, length 3m, one end with MPO interface, the other end with double LC interface |
QSFP-MPO-LC-4-5m | 40G one-to-four connection cable, length 5m, one end with MPO interface, the other end with double LC interface |