Detail Introduction
The BDCOM S5600 series switch is a new generation of 10G smart switches that Shanghai BDCOM Data Communication Co., Ltd. has launched for operators’ IP metropolitan area networks, government and enterprise networks, Internet cafes, and diskless working environments. S5600 is based on a new generation of high-performance hardware and BDROS software platform with independent intellectual property rights of BDCOM . It supports powerful ACL , flexible QinQ , 1:1 and N:1 VLAN switching, Ethernet OAM , carrier-grade QoS , and industrial-grade 10 Gigabit Ethernet ring. Network and other functions, so that this series of products can meet the application requirements of various complex scenarios.
Main features
Industrial-grade Ethernet ring network function, zero delay, zero packet loss
￭ Support industrial-grade Ethernet ring network protection protocol, protection switching time <50ms, after years of verification by BDCOM in the electric power, rail transit, military industry and other industries, it can achieve the high reliability requirements of zero packet loss.
Carrier Ethernet Switch
￭ Support carrier-grade Ethernet ring network protection protocol, protection switching time <50ms; support STP/RSTP/MSTP protocol, dual-uplink primary and backup link protection, LACP link aggregation and other simple and efficient redundant protection mechanisms to meet carrier-grade High reliability requirements.
￭ The perfect Ethernet OAM mechanism realizes rapid detection and location of faults through real-time monitoring of network operation status.
￭ Powerful ACL function supports access and control of L2~L7 data based on physical port, VLAN, MAC, IP, protocol port number, etc., providing users with flexible and diverse policy control methods.
￭ Support ISSU (In-Service Software Upgrade) business uninterrupted system upgrade to ensure uninterrupted forwarding of user data during system upgrade.
￭ Support rich layer 2 multicast functions, including IGMP-Snooping, user quick leave mechanism and cross-VLAN multicast replication function.
Carrier-level QoS strategy
￭ Supports classification of complex flows based on VLAN, MAC, source address, destination address, IP protocol, priority, etc., and supports re-marking of priority, providing a reliable and effective means for users to optimize services.
￭ Provide flexible bandwidth control strategies, support port-based or flow-based rate limiting functions, and ensure wire-speed forwarding of each port, thereby effectively ensuring the quality of high-quality voice, video, and data network services.
￭ Each port hardware supports 8 priority queues.
￭ Support multiple queue scheduling algorithms such as SP, WRR or SP+WRR.
Rich business features
￭ Complete Layer 2 and Layer 3 multicast routing protocols to meet the access requirements of IPTV, multi-terminal high-definition video surveillance and high-definition video conferences;
￭ A complete three-layer routing protocol and large routing table capacity can meet the needs of various types of network interconnection, and can form a large campus network, enterprise network and industry user private network.
￭ It fully supports Layer 2 and Layer 3 MPLS VPN, and can build a super-large MPLS VPN core network to meet the access needs of industry private network VPN users and enterprise VPN users.
Comprehensive IPv6 solution
￭ Full support for IPv6 protocol suite, support for IPv6 features such as IPv6 neighbor discovery, ICMPv6, Path MTU discovery, etc.
￭ Supports Ping, Traceroute, Telnet, SSH, ACL, etc. based on IPv6 to meet the needs of pure IPv6 network equipment management and business control.
Perfect safety mechanism
￭ Device-level security protection: advanced hardware architecture design, hardware implements hierarchical scheduling and protection of packets, supports defense against DoS, TCP’s SYN Flood, UDP Flood, broadcast storm, heavy traffic and other attacks on the device; supports command line hierarchical Protection, users of different levels have different management rights;
￭ Complete security authentication mechanism: support IEEE 802.1x, Radius, BDTacacs+, etc., which can provide users with a complete security authentication mechanism.
￭ Support the suppression of broadcast, multicast and unknown unicast messages to ensure the normal operation of the device under harsh network conditions.
￭ The perfect loop detection mechanism can ensure the stable operation of the network for a long time.
￭ Provide port isolation in the same VLAN, and security features such as DHCP-Snooping, IP+MAC+ port binding, and further ensure user data security.
Flexible and convenient management and maintenance
￭ Support multiple management methods such as Console, Telnet, SSH, etc.
￭ It supports WEB management, which is simpler and more efficient, and is convenient for installation and commissioning by engineering and maintenance personnel.
￭ Support file upload and download management in TFTP mode.
￭ Support ISSU (In-Service Software Upgrade) business uninterrupted system upgrade.
￭ It supports the standard SNMP protocol, and cooperates with Barda’s « NMS » intelligent network management platform, which can realize automatic device discovery, network topology management, device configuration management, performance data statistical analysis, fault management and other functions, simplifying network management and providing users with Brand new experience.
Technical Parameters
| project | S5612 | |
| Exchange capacity | 680Gbps/6.8Tbps | |
| Packet forwarding rate | 336Mpps | |
| Port description | 8 gigabit electrical ports
12 10 Gigabit optical ports |
|
| Chassis size | 440×315×44 (mm) | |
| power supply | AC: 100V-240V, 50Hz±10% | |
| Environmental requirements | Working temperature/humidity: 0℃-50℃, 10%-90% non-condensing
Storage temperature/humidity: -20℃-70℃; 5%-95% non-condensing |
|
| Mac swap | Support static configuration and dynamic learning of MAC address
Support view and clear MAC address Configurable MAC address aging time Support MAC address learning limit Support MAC address filtering function Support black hole MAC entries Support IEEE 802.1AE MacSec security control |
|
| VLAN | Support 4K VLAN table entries
Support GVRP Support 1:1 and N:1 VLAN Mapping Support basic QinQ functions Support flexible QinQ function Support Private VLAN |
|
| STP | Support 802.1D (STP), 802.1W (RSTP), 802.1S (MSTP)
Support BPDU protection, root protection, loop protection |
|
| Multicast | Support IGMP v1/v2/v3
Support IGMP Snooping Support IGMP Fast Leave Support multicast group policy and limit on the number of multicast groups Supports cross-VLAN replication of multicast traffic Support PIM-SM, PIM-DM |
|
| IPv4 | Support static routing, RIP v1/v2, OSPF, BGP, IS-IS, BEIGRP
Support policy routing Support equal cost routing to achieve load balancing Support BFD for OSPF, BGP |
|
| IPv6 | Support ICMPv6, DHCPv6, ACLv6, IPv6 Telnet
Support IPv6 neighbor discovery Support Path MTU discovery Support MLD v1/v2 Support MLD Snooping Support IPv6 static routing, RIPng, OSPFv3, BGP4+ Support manual tunnel, ISATAP tunnel, 6to4 tunnel |
|
| MCE | Support MCE function | |
| MPLS VPN | Support LDP protocol
Support MCE P/PE function requirements to support MPLS VPN Support MPLS TE Support MPLS OAM |
|
| QoS | Support traffic classification based on each field of the L2/L3/L4 protocol header
Support CAR flow limit Support 802.1P/DSCP priority re-marking Support queue scheduling methods such as SP, WRR, SP+WRR, etc. Support congestion avoidance mechanisms such as Tail-Drop and WRED Support traffic monitoring and traffic shaping Supports Ingress and Egress ACLs, supports matching L2, L3, L4 and IP quintuples for copying, forwarding, and discarding Support Hash homology and homology load balancing to ensure the session integrity of traffic output |
|
| Safety features | Support L2/L3/L4 based ACL flow identification and filtering security mechanism
Support anti-DDoS attack, TCP SYN Flood attack, UDP Flood attack, etc. Supports suppression of multicast, broadcast, and unknown unicast messages Support port isolation Support port security, IP+MAC+port binding Support DHCP Snooping, DHCP Option 82 Support IEEE 802.1x authentication Support Radius, BDTacacs+ certification Support uRPF Support command line hierarchical protection |
|
| reliability | Optional support power 1+1 backup
Support static/LACP mode link aggregation, support link aggregation across business cards Support EAPS, ERPS ring network protection Support HSRP, VRRP hot backup protocol Support GR for OSPF, BGP Support BFD for OSPF, BGP Support ISSU business uninterrupted system upgrade |
|
| Management and maintenance | Support Console, Telnet, SSH 2.0
Support ZTP Zero Touch Provisioning (Zero Touch Provisioning) Support browser-based WEB management Support SNMP v1/v2/v3 Support file upload and download management in TFTP mode Support RMON event history Support sFLOW and other traffic statistics analysis |
|
Ordering Information
| project | description |
| S5600 series | |
| S5612 | 12 port 10 Gigabit optical + 8 port Gigabit electricity, Ethernet network management switch (1 Console port, 12 10 Gigabit/Gigabit adaptive SFP+ optical ports, 8 Gigabit electrical ports; standard power supply AC220V, expandable dual Power supply; fan cooling, 1U height, standard 19-inch rack installation) |
| S5612-2AC | 12 ports 10 Gigabit optical + 8 ports Gigabit electricity, Ethernet switch (1 Console port, 12 10 Gigabit/Gigabit adaptive SFP+ optical ports, 8 Gigabit electrical ports; standard solidified dual power supply AC220V; fan cooling , 1U height, standard 19-inch rack installation) |
| Optical module | |
| Gigabit optical module | |
| GSFP-TX-B | Gigabit SFP optical to RJ45 electrical port module |
| GSFP-SX-D | Gigabit SFP multi-mode (500m, 850nm, LC, DDM) |
| GSFP-LX-10-D | Gigabit SFP single mode (10Km, 1310nm, LC, DDM) |
| GSFP-LX-20-D | Gigabit SFP single mode (20Km, 1310nm, LC, DDM) |
| GSFP-LX-40-D | Gigabit SFP single mode (40Km, 1310nm, LC, DDM) |
| GSFP-ZX-80-D | Gigabit SFP single mode (80Km, 1550nm, LC, DDM) |
| GSFP-ZX-120-D | Gigabit SFP single mode (120Km, 1550nm, LC, DDM) |
| GSFP-LX-SM1310-10-BIDI
GSFP-LX-SM1550-10-BIDI |
Gigabit SFP single-mode, single-core bidirectional (10Km, TX1310/RX1550, LC, DDM)
Gigabit SFP single-mode, single-core bidirectional (10Km, TX1550/RX1310, LC, DDM) |
| GSFP-LX-SM1310-20-BIDI
GSFP-LX-SM1550-20-BIDI |
Gigabit SFP single-mode, single-core bidirectional (20Km, TX1310/RX1550, LC, DDM)
Gigabit SFP single-mode, single-core bidirectional (20Km, TX1550/RX1310, LC, DDM) |
| GSFP-LX-SM1310-40-BIDI
GSFP-LX-SM1550-40-BIDI-1310 |
Gigabit SFP single-mode, single-core bidirectional (40Km, TX1310/RX1550, LC, DDM)
Gigabit SFP single-mode, single-core bidirectional (40Km, TX1550/RX1310, LC, DDM) |
| GSFP-LX-SM1490-80-BIDI
GSFP-LX-SM1550-80-BIDI |
Gigabit SFP single-mode, single-core bidirectional (80Km, TX1490/RX1550, LC, DDM)
Gigabit SFP single-mode, single-core bidirectional (80Km, TX1550/RX1490, LC, DDM) |
| GSFP-LX-SM1490-120
GSFP-LX-SM1550-120 |
Gigabit SFP single-mode, single-core bidirectional (120Km, TX1490/RX1550, LC, DDM)
Gigabit SFP single-mode, single-core bidirectional (120Km, TX1550/RX1490, LC, DDM) |
| Gigabit optical module | |
| SFP+SX | 10G SFP+ multimode (300m, 850nm, LC) |
| SFP+LX-10 | 10G SFP+ single mode (10Km, 1310nm, LC, DDM) |
| SFP+LX-20 | 10G SFP+ single mode (20Km, 1310nm, LC, DDM) |
| SFP+LX-40 | 10G SFP+ single mode (40Km, 1550nm, LC, DDM) |
| SFP+LX-80 | 10G SFP+ single mode (80Km, 1550nm, LC, DDM) |
| SFP+LX-SM-1270-10
SFP+LX-SM-1330-10 |
10G SFP+ single-mode, single-core bidirectional (10Km, TX1270/RX1330, LC, DDM)
10G SFP+ single-mode, single-core bidirectional (10Km, TX1330/RX1270, LC, DDM) |
| SFP+LX-SM-1270-20
SFP+LX-SM-1330-20 |
10G SFP+ single-mode, single-core bidirectional (20Km, TX1270/RX1330, LC, DDM)
10G SFP+ single-mode, single-core bidirectional (20Km, TX1330/RX1270, LC, DDM) |
| SFP+LX-SM-1270-40
SFP+LX-SM-1330-40 |
10G SFP+ single-mode, single-core bidirectional (40Km, TX1270/RX1330, LC, DDM)
10G SFP+ single-mode, single-core bidirectional (40Km, TX1330/RX1270, LC, DDM) |