Detail Introduction
BDCOM S3700 Series is a new generation of aggregation 10GE switches for the IP MAN (metropolitan area network), campus networks and enterprise networks. Developed on the basis of high performance hardware and advanced software system, it supports multiple services like IPv6, MPLS, VPN and network security based on L2/L3/L4 wire-speed switching service. It also supports nonstop upgrade, continuous forwarding, graceful restarting and redundancy protection.
Main features
Advanced Hardware Architecture and Industry-Leading Port Intensity
• 1U box-shaped switch with 48 GE ports and 8 10GE ports with high-performance ASIC switch chip;
• 64K MAC and 64K routing items.
Innovative Virtual Cluster Switching Technique
• Innovative BVSS (BDCOM Virtual Switch System): virtualize multiple physical devices into one. The performance, reliability and management of the virtual system are superior to the physical ones;
• Superior Performance: BVSS makes full use of each link in the physical devices, which avoids STP blocking the link and protects the original link to the maximum extent;
• High Reliability: Based on the advanced distribution mechanism and efficient cross-physical link aggregation link function, the logic control plane, service control plane and service data plane are separated. Thus, the device can support continuous layer3 routing forwarding, avoiding service interruption as a result of a single point of failure;
• Easy Management with single IP management.
Complete POE Power Supply
• 802.3AF/AT, built-in hot-swap modularized power, built-in dual power, no need for external power supply but with 48-port POE+ power supply;
• Continuous POE power supply when the device performs a hot restart;
• Power port priority in condition of inadequate power;
• Thunder proof of POE port as high as 2KV and of the power supply as high as 4KV.
Carrier-level High Reliability
• HPS (Hitless Protection System) such as the power module support dual back-up, hot-swap, seamless switching in the downtime without manual intervention;
• STP/RSTP/MSTP, VRRP protocol, Ethernet ring protection, dual master-slave uplink protection and LACP link aggregation;
• ISSU;
• BFD;
• Ethernet OAM mechanism, 802.3ah, 802.1ag and ITU-Y.1731;
• High reliability (99.999%) with 50ms MTTR.
Varied Service Characteristics
• Layer2 and layer3 multicast routing protocol for IPTV, HD video surveillance and HD video conference;
• Layer3 routing protocol and super-large routing table capacity;
• Layer2 and layer3 MPLS VPN.
IPv6 Solution
• IPv6 protocol suite, IPv6 neighbor discovery, ICMPv6, path MTU discovery, DHCPv6, etc.;
• Ping, Traceroute, Telnet, SSH, ACL based on IPv6;
• MLD, MLD Snooping, IPv6 static routing, RIPng, OSPFv3 and BGP4+, etc.;
• IPv6 tunnel: manual tunnel, automatic tunnel, GRE tunnel, 6to4 tunnel, ISATAP;
• IPv4 transiting to IPv6: IPv6 manual tunnel, automatic tunnel, 6 to 4 tunnel, ISATAP tunnel.
Complete Security Mechanism
• Equipment-Level Security: The hardware design implements the level-based packet schedule and packet protection, prevents DoS-/TCP-related SYN Flood, UDP Flood, Broadcast Storm or large traffic attacks, and supports level-based command line protection, endowing different levels of users with different management permissions;
• Security Authentication Mechanism: IEEE 802.1x, Radius and BDTacacs+;
• Enhanced Service Security Mechanism: Supports the plaintext or MD5 authentication of relevant routing protocol, URPF, deep inspection of hardware packet, control packet and data packet and filtering technology.
Innovative Energy-saving Design
• Intelligent power management supports real-time monitoring the device and the slow-start;
• Intelligent fan management system supports automatic speed regulation, which efficiently slow the fan speed and mitigate the noise;
• Comply with the international standard IEEE 802.3az.
Technical Parameters
Series | BDCom S3700P Layer 3 Carrier-Class 10G Manageable Switch |
---|---|
Model | BDCOM S3756P Layer 3 10G Manageable PoE Switch |
Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE802.3az, IEEE802.3ab,802.1D (STP), 802.1W (RSTP), 802.1S (MSTP) BPDU protection, root protection and ring protection |
---|---|
Network Management Type | Console, Telnet, SSH 2.0 Web SNMP v1/v2/v3 TFTP RMON sFLOW |
Primary Ports | 48 x RJ45 + 8 x SFP/SFP+ |
---|---|
Primary Port Speed | 10/100/1000/10000Mbps |
MAC Address Table | 64K |
---|---|
Switching Method | Store and Forward |
VLAN Support | 4K VLAN GVRP QinQ Private VLAN |
Jumbo Frames | 9.6KB |
Protocols | 802.1D (STP), 802.1W (RSTP) and 802.1S (MSTP) BPDU protection, root protection, and loopback protection Static configuration and dynamic MAC learning MAC browsing and removal Configurable aging time of the MAC address Limited number of learnable MAC addresses MAC filtration Black-hole MAC list |
---|---|
Security | L2/L3/L4 ACL flow identification and filtration DDoS attack prevention, TCP’s SYN Flood attack prevention, UDP Flood attack prevention, etc Broadcast/multicast/unknown unicast storm-control Port isolation Port security, and “IP+MAC+port” binding DHCP snooping and DHCP option 82 IEEE 802.1x authentication Radius, BDTacacs+ authentication URPF Level-based command line protection |
PoE | Yes |
SNMP | SNMP v1/v2/v3 |
QoS | Flow classification based on L2/L3/L4 protocols CAR flow limit 802.1P/DSCP priority re-labeling SP, WRR, and “SP+WRR” Congestion avoidance mechanisms like Tail-Drop and WRED Flow monitoring and flow shaping |
LACP | LACP link aggregation EAPS and ERPS(single ring) ISSU |
Layer | Full Layer 3 |
Port Mirroring | Yes |
Topology | Star |
LEDs | LED Indicator |
Power | AC 100V~240V 50/60HZ (5V -2A) DC: -36V~-72V Optional Dual Power Supply |
Features | Multicast: IGMP v1/v2/v3 IGMP Snooping IGMP Fast Leave Multicast group strategy and quantity limitation Multicast flow copying over VLANs PIM-SM and PIM-DM IPv4: Static routing, RIP v1/v2, OSPF, BGP Strategy routing Load balance by equivalent routing BFD for OSPF, BGP IPv6: ICMPv6, DHCPv6, ACLv6 and IPv6 Telnet IPv6 neighbor discovery Path MTU discovery MLD V1/V2 MLD snooping IPv6 Static Routing, RIPng, OSPFv3, BGP4+ Manual tunnel, ISATAP tunnel, 6 to 4 tunnel MCE: MCE MPLS VPN: LDP protocol MCE P/PE of MPLS VPN MPLS TE MPLS OAM Reliability: Power 1+1 backup Static/LACP link aggregation and cross service card link aggregation EAPS VRRP GR for OSPF and BGP BFD for OSPF and BGP ISSU Energy saving: IEEE 802.3az |
---|
Temperature | 0ºC to 50ºC (32ºF to 122ºF) |
---|---|
Humidity | 10% – 90%, Non-condensing |
Date First Available | April 21, 2019 |
---|