Detail Introduction
BDCOM S2900P series POE switches are a new generation of intelligent switches launched by Shanghai BDCOM Data Communication Co., Ltd. for operators’ IP metropolitan area networks, government and enterprise networks, Internet cafes, and diskless working environments. S2900 is based on a new generation of high-performance hardware and BDROS software platform with independent intellectual property rights of BDCOM . It supports powerful ACL , flexible QinQ , 1:1 and N:1 VLAN switching, Ethernet OAM , carrier-grade QoS , and industrial-grade 10 Gigabit Ethernet ring. Network and other functions, support the three-layer routing protocol. This series of products can meet the application requirements of various complex scenarios.
BDCOM S2900P series POE switches have S2928P , S2952P/S2952P-800 product forms, which can meet the application requirements of networks of different scales.
Main features
Advanced hardware architecture design, the highest port density in the industry
■ On a 1U box switch, it achieves the industry’s highest port density of 48 Gigabit + 8 Gigabit, equipped with high-performance ASIC switching chips, which can meet the application requirements of various complex scenarios.
Industrial-grade Ethernet ring network function, zero delay, zero packet loss
■ Support industrial-grade Ethernet ring network protection protocol, protection switching time <50ms , after years of verification by BDCOM in the electric power, rail transit, military industry and other industries, it can achieve the high reliability requirements of zero packet loss.
Carrier Ethernet Switch
■ Support carrier-grade Ethernet ring network protection protocol, protection switching time <50ms ; support STP/RSTP/MSTP protocol, dual-uplink primary and backup link protection, LACP link aggregation and other simple and efficient redundancy protection mechanisms to meet carrier-grade High reliability requirements.
■ The perfect Ethernet OAM mechanism realizes rapid detection and location of faults through real-time monitoring of network operation status.
■ Powerful ACL function supports access and control of L2~L7 layer data based on physical ports, VLANs , MAC , IP , protocol port numbers, etc. , providing users with flexible and diverse policy control methods.
■ Support ISSU ( In-ServiceSoftware Upgrade ) business uninterrupted system upgrade to ensure uninterrupted forwarding of user data during system upgrade.
■ Support rich Layer 2 multicast functions, including IGMP-Snooping , user quick leave mechanism and cross- VLAN multicast replication function.
Carrier-level QoS strategy
■ Supports classification of complex flows based on VLAN , MAC , source address, destination address, IP protocol, priority, etc., and supports re-marking of priority, providing a reliable and effective means for users to optimize services.
■ Provide flexible bandwidth control strategies, support port-based or flow-based rate limiting functions, and ensure wire-speed forwarding of each port, thereby effectively ensuring the quality of high-quality voice, video, and data network services.
■ Each port hardware supports 8 priority queues.
■ Support multiple queue scheduling algorithms such as SP , WRR or SP+WRR .
Comprehensive IPv6 solution
■ Fully support IPv6 protocol suite, support IPv6 neighbor discovery, ICMPv6 , PathMTU discovery and other IPv6 features.
■ Supports Ping , Traceroute , Telnet , SSH , ACL, etc. based on IPv6 to meet the needs of pure IPv6 network equipment management and business control.
Perfect safety mechanism
■ Device-level security protection: advanced hardware architecture design, hardware implements hierarchical scheduling and protection of packets, supports defense against DoS , TCP ‘s SYN Flood , UDP Flood , broadcast storm, heavy traffic and other attacks on the device; supports command line classification Protection, users of different levels have different management rights;
■ Complete security authentication mechanism: support IEEE 802.1x , Radius , BDTacacs+, etc., which can provide users with a complete security authentication mechanism.
■ Support the suppression of broadcast, multicast and unknown unicast messages to ensure the normal operation of the device under harsh network conditions.
■ The perfect loop detection mechanism can ensure the stable operation of the network for a long time.
■ Provide port isolation in the same VLAN , and security features such as DHCP-Snooping , IP+MAC+ port binding, etc., to further ensure user data security.
Perfect POE power supply function
■ Support 802.3AF/AT standard, built-in high-power power supply, 48- port model is compatible with AC and DC input at the same time .
■ When the whole device is hot restarted, the POE power supply is uninterrupted.
■ When the power supply is not enough, the priority of the power supply port can be configured. The high priority gives priority to power supply to ensure important services.
Flexible and convenient management and maintenance
■ Support multiple management methods such as Console , Telnet and SSH .
■ Support WEB management, simpler and more efficient, convenient for installation and commissioning by engineering and maintenance personnel.
■ Support file upload and download management in TFTP mode.
■ Support ISSU ( In- Service Software Upgrade ) business without interruption of system upgrade.
■Support standard SNMP protocol, and cooperate with Barda’s « NMS » intelligent network management platform, which can realize automatic device discovery, network topology management, device configuration management, performance data statistical analysis, fault management and other functions, simplifying network management and providing users with Brand new experience.
Technical Parameters
project | S2952P-800 | ||
Exchange capacity | 336Gbps/3.36Tbps | ||
Packet forwarding rate | 148Mpps | ||
MAC capacity | 32K | ||
Port description | 48 Gigabit POE electrical ports
4 10 Gigabit optical ports |
||
Chassis size | 440×280×44 | ||
Full load power consumption | <40W | ||
POE power | AC: 740W
DC: 740W |
||
Operating temperature | -10~50°C | ||
storage temperature | -40~75°C | ||
humidity | Working humidity: 10%-90% non-condensing
Storage humidity: 5%-95% without condensation |
||
power supply | AC: 100V-240V, 50Hz±10%
DC: 53.5~57V (DC input port of 2952P model) |
||
Mac swap | Support static configuration and dynamic learning of MAC address
Support view and clear MAC address Configurable MAC address aging time Support MAC address learning limit Support MAC address filtering function Support IEEE 802.1AE MacSec security control |
||
VLAN | Support 4K VLAN table entries
Support GVRP Support QinQ function Support Private VLAN Support voice vlan |
||
Ring network protection | Support 802.1D (STP), 802.1W (RSTP), 802.1S (MSTP)
Support BPDU protection, root protection, loop protection Support EAPS Ethernet link automatic protection protocol Support ERPS Ethernet ring network protection protocol |
||
Multicast | Support IGMP v1/v2/v3
Support IGMP Snooping Support IGMP Fast Leave Support multicast group policy and limit on the number of multicast groups Supports cross-VLAN replication of multicast traffic |
||
IP routing | Support ipv4/ipv6 dual stack protocol
Support static routing Support RIP, OSPF dynamic routing Support VRRP virtual routing |
||
IPv6 | Support ICMPv6, DHCPv6, ACLv6, IPv6 Telnet
Support IPv6 neighbor discovery Support Path MTU discovery Support MLD v1/v2 Support MLD Snooping |
||
DHCP | Support DHCP Server
Support DHCP Relay Support DHCP Client Support DHCP Snooping |
||
ACL | Supports Layer 2, Layer 3, and Layer 4 ACL
Support IPv4, IPv6 ACL Support VLAN ACL |
||
QoS | Support traffic classification based on each field of the L2/L3/L4 protocol header
Support CAR flow limit Support 802.1P/DSCP priority re-marking Support queue scheduling methods such as SP, WRR, SP+WRR, etc. Support congestion avoidance mechanisms such as Tail-Drop and WRED Support traffic monitoring and traffic shaping |
||
Safety features | Support L2/L3/L4 based ACL flow identification and filtering security mechanism
Support anti-DDoS attack, TCP SYN Flood attack, UDP Flood attack, etc. Supports suppression of multicast, broadcast, and unknown unicast messages Support port isolation Support port security, IP+MAC+port binding Support DHCP sooping, DHCP option82 Support IEEE 802.1x authentication Support Radius, BDTacacs+ certification Support command line hierarchical protection |
||
reliability | Support static/LACP mode link aggregation
Support UDLD unidirectional link detection Support Ethernet OAM Support ISSU business uninterrupted system upgrade |
||
Management and maintenance | Support Console, Telnet, SSH 2.0
Support ZTP Zero Touch Provisioning (Zero Touch Provisioning) Support browser-based WEB management Support SNMP v1/v2/v3 Support file upload and download management in TFTP mode Support RMON event history |
Ordering Information
project | description |
S2900P series | |
S2952P-800 | 48 ports of Gigabit power, 4 ports of 10 Gigabit optical, Ethernet POE switch (1 CLI control port, 48 Gigabit POE electrical ports, 4 10 Gigabit/Gigabit SFP+ optical ports; standard power supply AC and DC hybrid isolation power supply , AC input POE power 740W, DC input POE power 740W, fan cooling, 1U height, standard 19-inch rack installation) |
Optical module | |
Gigabit optical module | |
SFP+SX | 10G SFP+ multimode (300m, 850nm, LC) |
SFP+LX-10 | 10G SFP+ single mode (10Km, 1310nm, LC, DDM) |
SFP+LX-20 | 10G SFP+ single mode (20Km, 1310nm, LC, DDM) |
SFP+LX-40 | 10G SFP+ single mode (40Km, 1550nm, LC, DDM) |
SFP+LX-80 | 10G SFP+ single mode (80Km, 1550nm, LC, DDM) |
SFP+LX-SM-1270-10
SFP+LX-SM-1330-10 |
10G SFP+ single-mode, single-core bidirectional (10Km, TX1270/RX1330, LC, DDM)
10G SFP+ single-mode, single-core bidirectional (10Km, TX1330/RX1270, LC, DDM) |
SFP+LX-SM-1270-20
SFP+LX-SM-1330-20 |
10G SFP+ single-mode, single-core bidirectional (20Km, TX1270/RX1330, LC, DDM)
10G SFP+ single-mode, single-core bidirectional (20Km, TX1330/RX1270, LC, DDM) |
SFP+LX-SM-1270-40
SFP+LX-SM-1330-40 |
10G SFP+ single-mode, single-core bidirectional (40Km, TX1270/RX1330, LC, DDM)
10G SFP+ single-mode, single-core bidirectional (40Km, TX1330/RX1270, LC, DDM) |